TIM MIRUS Controller - Page 45

6 Maintenance and Cleaning
IFU, MIRUS Controller, en-GB, N.00 45
For wipe disinfection use agents with the following ingredients:
Agent
Specification
Alcohol based
Containing:
 Isopropyl alcohol (70% solution)
 Ethyl alcohol (70% solution)
 Composition of Ethyl alcohol (70%) and
Isopropyl alcohol (70%)
Non-alcohol based
Containing quaternary ammonium compounds:
 Didecyldimethylammoniumchloride
max. 0,25 g / 100 g ready-for-use solution
 Alkyl(C12-16)dimethylbenzylammoniumchloride
max. 0,5 g / 100 g ready-for-use solution
For wipe disinfection TIM recommends:
 Bacillol
®
Wipes
 Dr. Schumacher
®
Cleanisept Wipes
 Terralin
®
protect
In addition to the main ingredients, cleaning agents and disinfectants often contain additives
which can damage the materials. If in doubt, contact the supplier/manufacturer of the
disinfectant/detergent.
List of materials used:
Component
Material
Housing
Polystyrene (PS)
Alarm lights
Polycarbonate (PC)
Touch Screen
Polyester (PES)
Park Bay
AlMgSi alloy, anodised, AlCuMg, anodised
Fill port Flap
AlMgSi alloy, anodised
Seals / Covers
Silicone, Polyethylene (PE), Synthetic rubber (EPDM)
Battery flap
Aluminium, anodised
Screws
Stainless steel
Labels
Polyethylene (PE)
Housing feet
Polyvinylchloride (PVC)
Fan filter
Acrylonitrile butadiene styrene (ABS)
Power supply cord
Acrylonitrile butadiene styrene (ABS), Polyvinylchloride (PVC)
IEC plug
Polybutylene terephthalate (PBT)
Potential equalization
Nickel-plated brass