TINY AUDIO C10 User Guide
19
USING DAB ADAPTER
To Turn On or Off TINY AUDIO C10
The TINY AUDIO C10 operating mode can be turned off or turned on by the following:
1. Press and hold Rotary Knob to turn it off, while TINY AUDIO C10 is in the
operating mode.
2. Press Rotary Knob to return it to the operating mode, while TINY AUDIO C10 is
off.
To Scan for the DAB Stations
This function searches for all DAB stations in Band III from channel frequency 5A to
channel frequency 13F that are available in the area where your car is presently
located. Stations found as a result of the search are added to the station list. To scan
for the DAB stations, do the following:
1. Press Rotary Knob and then SCAN to do a full scan of DAB stations, the screen
will show《 SCANNING 》.
Note:
While the Scan operation is in process, you can press BACK at any time to
stop Scan function and revert to listening to the currently selected station.
Each time you start TINY AUDIO C10, if the station list is empty, it will
perform a Full Scan of DAB stations automatically.
You may also need to perform a Scan function if you drive your car to a new
area where the broadcasting DAB stations are not on the current station list.
If there are no stations found after the DAB Scan, the screen will show
《 EMPTY 》as there are no DAB stations available in the area where you
performed DAB Scan function.
To Listen to the DAB Stations
There are two options available for you to select and listen to a DAB station: Quick
Tune and Step Tune. Step Tune is used when you want to step through the list of
stations one by one. Quick Tune allows you to move more quickly through the list of
stations according to the sorting method, either by alphabetical order or by ensemble
sequence. Once you have reached the desired initial alphabet or the ensemble
number by Quick Tune, you can then use Step Tune to refine and move to the
desired station one by one within the selected initial alphabet or within the selected
ensemble.
Step Tune
To Next Page
Loading...