TINY AUDIO C10 User Guide
27
1. Press LINK, and the screen will show the current FM Transmitting Frequency
《 Frequency》.
2. You can accelerate rotating the Rotary Knob [◄] [►] to step up or down FM
frequency by 2MHz, or rotate the Rotary Knob [◄] [►] to step up or down FM
frequency by 100KHz, to choose a frequency, until the desired FM frequency is
displayed (e.g. 106.7MHz).
3. Then press and hold a X control key (where X is from 1 to 4) to save the current
selected FM frequency into the corresponding preset memory FX.
4. The screen will display a short message of 《 FX SAVED》.
Note:
The default FM frequencies saved in presets F1 to F4 are 88.1MHz, 92.5MHz,
102.5MHz and 107.9MHz, respectively.
It is suggested to set those FM frequencies saved in TINY AUDIO C10 into
FM preset of your car radio. Selecting the FM preset of your car radio and the
matching FM preset of TINY AUDIO C10 will switch the FM transmission
frequency instantly for a clear reception of the DAB station.
Saving the frequency in memory does not affect the current FM transmitting
frequency; it remains the same as before saving the frequency.
To Recall FM Transmitting Frequency Saved in Memory
You may drive into an area where the FM frequency transmitted by TINY AUDIO C10 is
used by an FM broadcaster. When this happens, your reception of DAB station will be
getting worse with increasing interference from another FM program. Switch to a free
FM frequency will ensure continuous and clear reception of the DAB station to which
you are currently listening.
1. Press LINK, and the screen will show the current FM Transmitting Frequency.
2. Press a X control key (where X is from 1 to 4) to select a corresponding FM
memory preset FX and the screen will show 《 FX Frequency 》 where frequency
is the frequency saved in FM preset memory FX.
3. Press Rotary Knob or after 5 seconds timeout, the TINY AUDIO C10 will set and
transmit FM signal at this new frequency. The screen will display the new
frequency as the current frequency.
4. Press FM preset of your car radio corresponds to the same frequency from step 2
if you have previously saved for DAB reception. Otherwise, tune the car radio to
the same FM frequency.
5. Now you can listen to DAB stations via this new FM Frequency.
To Next Page
Loading...
