Tiny Audio C10 - Technical Specifications

TINY AUDIO C10 User Guide
40
 I cannot re-connect to the held phone call automatically while in Hands Free
mode
As there are different made of Smartphone, you might not be re-connected back to the
held call automatically on the following condition.
1. There are two calls in progress, one is active and one is on hold.
2. If the active call is hung up (by you or the destination); although TINY AUDIO C10
displays the held call becomes active, but the actual call might be still on hold.
3. When this happens, try rotate Rotary Knob [◄] [►] to return the held call to
active. If this does not work, please hang up and redial the held party.
 I hear echo or call volume is too low while in Hands Free mode
While the Hands Free call is in progress, if you experience the following conditions:
1. If the destination party hears echo, try turning down the volume of your
Smartphone or the car radio.
2. If you hear the call volume is too low, try turning up the volume of your
Smartphone or the car radio.
3. If the destination party indicates the call volume is too low, advise the destination
party to turn up the volume of his Smartphone or try turning up the volume of your
Smartphone.
TECHNICAL SPECIFICATIONS
 Digital Audio Services: DAB/DAB+.
 RF Frequency Range: DAB Band III (174 MHz ~ 240 MHz).
 RF Sensitivity for DAB Band III: -98dBm ~ -100dBm.
 FM Transmit Range: 88.1 MHz ~ 107.9 MHz.
 Bluetooth: Version 4.1, backward compatible with BT3.0, 2.0, and 1.2
 Mains Power: 12V DC
 Presets: 4x4 DAB station presets and 4 FM transmit presets.
 Operating Temperature Range: -10 ~ +70.
 Storage Temperature Range: -30 ~ +80.
 DAB Antenna Connector:
- Connector Type: SMB
- Output Voltage: 12V