TINY AUDIO C10 User Guide
39
Press and hold BACK twice in succession to reset FM transmitting
frequency to 88.1MHz.
b) Reset to frequency that has been saved in FM frequency preset 1
Operating on Car Radio
Press FM preset of your car radio corresponds to the same frequency as in
TINY AUDIO C10’s FM frequency preset 1, if you have previously saved for
DAB reception. Otherwise, tune the car radio to that FM frequency manually.
Operating on TINY AUDIO C10
Press and hold BACK to reset FM transmitting frequency to FM frequency
preset 1.
3. If TINY AUDIO C10 is in AutoScan mode, the FM channel you selected for DAB
mode may be occupied by an existing radio station. You need to change the
frequency settings of FM Transmitter. Please refer To enable AutoScan to set a
suitable new frequency.
If you hear static noise or a FM program and before AFC tunes to a clear
frequency, you can force an immediate frequency change manually by one of the
following:
Refer to FM Transmitting Frequency Settings section:
1. Set FM transmitting frequency manually
2. Recall FM transmitting frequency saved in the memory
3. Force immediate FM transmitting frequency change
4. Set FM transmitting frequency to memory preset F1
5. Reset FM transmitting frequency to default 88.1MHz
I cannot hear audio from the Bluetooth Audio Streaming
Check the setup and ensure the following:
1. Enable Bluetooth from your mobile device.
2. Enable Bluetooth from TINY AUDIO C10’s menu setting.
3. Start Bluetooth paring from TINY AUDIO C10’s menu setting
4. Search and connect to TINY AUDIO C10 from your mobile device
5. Once connected, ensure TINY AUDIO C10 Bluetooth device’s Media Audio
setting is checked on your mobile device.
6. Start playing the audio from your mobile device.
7. Switch TINY AUDIO C10 to Audio Streaming by pressing Rotary Knob then
AUX to listen to the audio from your car radio.
To Next Page
Loading...
