TINY AUDIO C10 User Guide
28
To Force Immediate FM Transmitting Frequency Change
This function can be used in either AFC or AutoScan mode to force a FM transmission
frequency change immediately.
In AFC_H or AFC_L Mode
While listening to a DAB station, if you hear static noise or a FM program and before
AFC tunes to a clear frequency you can force an immediate frequency change by:
1. Press and hold LINK, the screen will show 《 AF Frequency 》 where Frequency
is the new frequency that TINY AUDIO C10 will set and use to transmit FM signal
and force radio to tune to the same frequency automatically.
2. Now you can listen to DAB stations via this new FM Frequency.
In AutoScan Mode
If you notice your current listening DAB program is being interfered with, you can force
an immediate frequency change. TINY AUDIO C10 will automatically choose and set a
new frequency but you must tune the car radio to match TINY AUDIO C10 new
frequency manually. Do the following:
Operating on TINY AUDIO C10
1. Press and hold LINK, the screen will show 《 TO Frequency 》 where Frequency
is the new frequency that TINY AUDIO C10 will set and use to transmit FM signal.
Operating on Car Radio
1. Manually change your car radio’s FM frequency to match the new TINY AUDIO
C10 transmitting frequency setup.
To Set FM Transmitting Frequency Setting to Preset F1
This function allows you to set the FM transmitting frequency to the frequency saved in
FM frequency preset F1. TINY AUDIO C10 will change the transmitting frequency
immediately.
1. Press and hold BACK to set FM transmitting frequency to the frequency saved in
FM preset F1.
Note:
After setting the FM frequency to preset F1, You have the option to return to
the default FM transmitting frequency 88.1MHz by, within 30 seconds after
step 1, press and hold BACK again.
To Reset FM Transmitting Frequency Setting
This function allows you to reset the FM transmitting frequency to the default setting
FM 88.1MHz.
To Next Page
Loading...