TINY AUDIO C10 User Guide
1
INTRODUCTION
The TINY AUDIO C10 is an in-car digital audio adapter that offers a flexible and cost
effective way to apply modern digital audio technology to your existing analogue in-car
audio system.
The existing analogue system can be easily upgraded to receive digital signal without
replacement of any component of the car audio system. TINY AUDIO C10 support the
Hands free function and caller ID display for the incoming call to the Bluetooth connected
mobile device, and receive the digital signal from the audio streaming from a mobile
device using the Bluetooth technology and the DAB digital radio service output from the
DAB antenna, and convert the digital signal to an FM signal. The FM signal is then
transmitted on a FM frequency and listen through the in-car audio system.
The TINY AUDIO C10 is operated using a remote controller, while all messages related
to the system’s operations, such as service name, memory preset, etc., are converted to
RDS text and displayed on the LCD screen of your in-car audio system; also, TINY
AUDIO C10 uses FM-RDS micro-transmitter and no complex cabling to your car audio
system. These flexible configuration options of the TINY AUDIO C10 make it easy to
install in different car makes and models.
Furthermore, TINY AUDIO C10 has an AFC (Automatic Frequency Change) function that
allows you to continuously listen to your favorite DAB programs thru your car radio
system without the need to change the FM frequency manually when you drive
into a
metropolitan area where FM stations are highly crowded. Consult your car radio manual
or the car dealer if your car radio is RDS compatible, has the AF (alternative frequency)
function, and how to enable AF function before using this AFC function. If AF function is
not built in your car radio, you can use TINY AUDIO C10’s AutoScan function instead.
Note:
TINY AUDIO C10 needs to operate with an RDS car radio in order to properly display the
relevant system message of TINY AUDIO C10 via the in-car radio display.