Tiny Audio C10 - To Restore to Factory Settings

TINY AUDIO C10 User Guide
36
To Perform DAB List Reset
1. In the menu function, rotate Rotary Knob [◄] [►] until the selection is
《 DABRESET 》.
2. Press Rotary Knob to perform a reset operation for DAB station list.
3. If you do want to reset, rotate Rotary Knob [◄] [►] to find《 YES 》and then
press Rotary Knob for confirmation. Otherwise, you can press Rotary Knob to
cancel while the screen shows 《 NO 》 . The screen will then show
《 RESETING 》to indicate that DAB list reset is in progress.
Note:
DAB list reset will erase the station list but keep the memory presets for all
DAB Presets, and then perform a full scan of DAB stations automatically after
the DAB list has reset. It does not change the current FM transmitting
frequency or return all FM transmitting frequency presets to default.
To Restore to Factory Settings
1. In the menu function, rotate Rotary Knob [◄] [►] until the screen shows
《 FACTORY 》.
2. Press Rotary Knob to perform a factory reset operation.
3. If you do want to reset, rotate Rotary Knob [◄] [►] to find《 YES 》and then
press Rotary Knob for confirmation. Otherwise, you can press Rotary Knob to
cancel while the screen shows《 NO 》.
3.1 The screen will show 《 RESETING 》 to indicate that factory reset is in
progress.
3.2 The system will perform a scan of DAB stations automatically after the factory
reset is completed. You must switch the car radio to FM 88.1MHz to continue
DAB listening.
Note:
Factory reset will erase all previous system’s settings and set them to default.
To Upgrade Module Software
This function is used by the maintenance personnel only, to upgrade the existing TINY
AUDIO C10 module software to a new version.