Tiny Audio C10 - Using Audio Streaming; To Set the Bluetooth Audio Input mode

TINY AUDIO C10 User Guide
23
USING AUDIO STREAMING
The TINY AUDIO C10 is capable of receiving audio streaming through your car radio when
it is switched to AUX mode. While in the audio streaming, you can return to the DAB
mode and listen to the DAB station by the following:
 To listen to the last listened DAB station, you must press Rotary Knob and
then DAB to return to DAB mode and then TINY AUDIO C10 will tune to the
last listened DAB station.
 To recall a preset DAB station, you must press a number control key X directly
(where X is from 1 to 4) to return to the DAB mode and tune to the last listened
memory preset location in preset group X. If the memory preset is empty then
TINY AUDIO C10 will tune to the last listened DAB station instead.
To Set the Bluetooth Audio Input mode
The Bluetooth audio input mode is setup to play audio from your mobile device
(Smartphone or Tablets) using the Bluetooth technology, you must switch TINY AUDIO
C10 to AUX mode, enable TINY AUDIO C10’s Bluetooth function, and then perform the
Bluetooth device paring between TINY AUDIO C10 and your mobile device, if they are
not already paired, before the connection can be made. For detail, please refer to the
menu setting sections for To Enable Bluetooth, To Setup Bluetooth Paring , and To Reset
Bluetooth Pairing.
1. Press Rotary Knob then AUX to switch to AUX mode, and start listening to the
audio streaming if a mobile device is connected to TINY AUDIO C10 using
Bluetooth.
2. Rotate the Rotary Knob [►] to advance the play to the next song in the list.
3. Rotate the Rotary Knob [◄] to return the play to the previous song in the list.
4. Press Rotary Knob to toggle the play/pause control.
5. The play control can also be operated from your mobile device.