TINY AUDIO C10 User Guide
4
INSTALLATION
Please read the installation procedure carefully prior to the actual installation. Consult a
professional installer if you have any issues or concerns with the installation.
ATTENTION
1. We recommend that if you are going to use the cigarette lighter as
the power source for TINY AUDIO C10, the lighter socket needs to
connect to the ignition.
2. Otherwise, you may have the following condition, after the car engine
is turned off:
TINY AUDIO C10 will continue to draw minimal power from the
battery.
For many intelligent new cars, TINY AUDIO C10 may be detected
as device not disconnected.
3. Car radio and TINY AUDIO C10 may become out of sync when you
resume to listening to TINY AUDIO C10. In this case, please read the
troubleshooting section for the solution.
1. Select a location to store TINY AUDIO C10. For the best performance, please store
it in the middle and under the car’s glove compartment. For other locations, please
store it away from metal objects and in an open area.
2. Store TINY AUDIO C10 with the bottom cover up, and with the antenna cable, power
cable, and connectors point to the back.