TINY AUDIO C10 User Guide
30
MENU SETTINGS
You must press Rotary Knob then MENU button to enter the menu function, rotate Rotary
Knob [◄] [►] to select a menu setting, and then press Rotary Knob to confirm the
selection to return to the menu selection screen. Then, you must press the Back key or
after 5 seconds timeout, to return to the DAB or Audio Streaming display mode.
To Enable DLS/DL+ Display
When you enable DLS/DL+ Display, the screen will show DLS information such as
song titles, music types and news or traffic updates from the station if DLS is being
received, or DL+ information, song track, song artist if DL+ is being received. The
DLS/DL+ information are either displayed in one line or three lines as enabled below:
1. In the menu function, rotate Rotary Knob [◄] [►] until the selection is
《 RADIOTXT 》.
2. Press Rotary Knob to enter radio text selection operation.
3. Then you can rotate Rotary Knob [◄] [►] until the screen shows 《 ON 》 to
enable the DLS/DL+ display on radio.
4. Or you can rotate Rotary Knob [◄] [►] until the screen shows 《 OFF 》 to
disable the DLS/DL+ display on screen.
5. Finally, press Rotary Knob to set the DLS/DL+ display.
Note:
The default DLS/DL+ setting is ON.
To Set DAB Sorting Order
There are two ways that TINY AUDIO C10 can sort the stations in the station list, it can
be either sorted by alphabetical order of the station name, or by DAB ensemble
(channel) ID. In each DAB ensemble, the stations are ordered according to the
station ID and not necessary by alphabetical order of the station name.
1. In the menu function, rotate Rotary Knob [◄] [►] until the screen shows
《 DABORDER 》.
2. Press Rotary Knob to enter DAB sorting selection operation.
3. If you do want to sort the DAB station list by ensemble, rotate Rotary Knob
[◄][►] to find 《 ENSEMBLE 》.
4. Otherwise, if you want to sort the DAB station list by alphabetical order, rotate
Rotary Knob [◄] [►] to find 《 ALPHABET 》.
To Next Page
Loading...
