TINY AUDIO C10 User Guide
25
ringing, the car radio screen will display 《 OUTGOING CALL 》and the current audio
from the DAB mode or the Audio Streaming mode is interrupted. Once the call
destination answers the call, the screen will show 《 LINE X 》as for the incoming call.
Then, you can hang up, answer another call, and switch between two active calls.
ATTENTION
While using your Smartphone on a Hands Free call via TINY AUDIO C10,
the far end party may experience echo. When this happens, please try the
following steps, in sequence, to lessen the echo effect:
1. Adjust your car radio’s volume
As car radio’s volume range varies among different models, adjust
the volume to clear, comfortable, but not a loud level while listening
to the far end on a call.
2. Adjust your Smartphone’s volume
Use your phone’s volume button and lower the Bluetooth
connection’s volume setting to decrease the echo effect. As there
are many different made of Smartphone, the setting can differ. For
example, the suggested setting for iPhone users is 5 notches
below the maximum setting.
FM TRANSMITTING FREQUENCY SETTINGS
The FM transmitting frequency is used by TINY AUDIO C10 to transmit the audio and for
car radio to receive the audio. The FM transmitting frequency can be changed by the
following:
1. Set FM transmitting frequency in AFC mode
2. Set FM transmitting frequency manually
3. Recall FM transmitting frequency saved in the memory
4. Force immediate FM transmitting frequency change
5. Set FM transmitting frequency to memory preset F1
6. Reset FM transmitting frequency to default 88.1MHz
To Next Page
Loading...
