TINY AUDIO C10 User Guide
20
1. Rotate the Rotary Knob [◄] [►] to step through the stations, one by one, until
the screen shows the desired station: 《 station name 》.
Quick Tune
1. Accelerate Rotating the Rotary Knob [◄] [►] to move through the first letters in
the alphabet if the station list is sorted alphabetically, or move through the
ensemble sequence if the station is sorted by ensemble. Repeat the action, one
alphabet at a time, or one ensemble at a time, until the screen shows the DAB
station with desired initial alphabet or the desired ensemble.
2. Do the Step Tune to step thru the stations, one by one, until the screen shows the
desired station:《 station name 》.
3. The system will tune to the station immediately.
Note:
The DAB sorting method for the station list, either by alphabetical order or by
ensemble, is set thru the menu setting.
To Change DLS/DL+ Information Display
The TINY AUDIO C10 provides a number of information about the current listening
station; this information can be displayed thru repeatedly pressing the Rotary Knob
key.
1. Each time you press Rotary Knob while listening to a DAB station, the screen will
cycle through station’s information below:
《 station name 》 where station name is name of the DAB station.
《 DLS/DL+ info 》 when DLS/DL+ is enabled thru menu settings, it displays real
time Dynamic Label Segment (DLS) station information such
as song titles, music type and news or traffic updates, or
Dynamic Label Plus (DL+) extended information for song
track and song artist.
《 SIG xx% 》 where xx is the signal quality value.
Note:
If the display setting is set to off, the screen will show 《 TEXT OFF 》while
displaying the DLS/DL+ information.
To Save a Memory Preset
You can save your favorite stations in the memory preset List. There are 4 groups (1 to
4) of memory presets, and each group has 4 sets of memory location to store 4 DAB
stations. Therefore, a total of 16 DAB stations can be saved in the memory preset List
in DAB mode.
To Next Page
Loading...
