TINY AUDIO C10 User Guide
15
OPERATION CONTROLS
In-Car Audio System LCD Display
The TINY AUDIO C10 unit is operated by using a remote controller; the system messages
from the remote control operation are converted to RDS text and displayed as 8 characters
display on the LCD screen of your in-car audio system.
Below is a list of TINY AUDIO C10 system messages displayed on the in-car audio system
LCD display, while operating with the remote control:
Messages Description
DABRADIO Display after TINY AUDIO C10 is powered on.
station name
Display the 8-character short service name of the DAB station.
TUNING Indicate tuning a DAB station is in progress.
RESETING Indicate performing a DAB reset or factory reset is in progress.
DONE Confirm completion for certain system operation,
RETUNING
Indicate FM transmitting frequency is being tuned to a new
frequency.
TO frequency
Indicate TINY AUDIO C10 is changing FM transmitting frequency to a
new frequency from a manual setting.
AF frequency
Indicate TINY AUDIO C10 is changing FM transmitting frequency to a
new frequency from the AFC function. Other than press and hold the
BACK key, any remote control keys pressed is ignored before the
change is completed.
POWEROFF Display after TINY AUDIO C10 is turned off (into the standby mode).
RC LOW Indicate remote control’s battery is low, battery change is due.
To Next Page
Loading...
