EasyManua.ls Logo

Tiny Audio C10 - To Enable AutoScan

Tiny  Audio C10
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TINY AUDIO C10 User Guide
33
feature and the AF feature of your car radio must be activated. When the AFC function
of TINY AUDIO C10 is enabled and the AF feature of your car radio is activated, your
car radio will tune to an unused FM frequency automatically when you drive into an
area where the original FM frequency for DAB is no longer available.
Furthermore, there are two AFC modes, AFC_H (High Sensitive) & AFC_L (Low
Sensitive). While in AFC mode, TINY AUDIO C10 will detect and determine if a
frequency change is necessary constantly. Set AFC_L mode, if you experience the
FM frequency is being changed too often, and set AFC_H mode, if you often hear static
noise and the FM frequency is not changed.
By default TINY AUDIO C10 is already set to use AFC_H mode; however, if you want
to change or return to AFC mode, do the following:
Setting on TINY AUDIO C10
1. In the menu function, rotate Rotary Knob [◄] [►] until the screen shows
LINKMODE .
2. Press Rotary Knob, and then rotate Rotary Knob [◄] [►] until the screen shows
AFC_H or AFC_L .
3. Press Rotary Knob, the AFC function is now enabled and the TINY AUDIO C10 is
operating in the AFC mode.
4. When TINY AUDIO C10 performs this AFC function, the screen will show AF
Frequency where Frequency is the new frequency that TINY AUDIO C10 will
set and use to transmit FM signal and force radio to tune to the same frequency
automatically.
Setting on Car Radio
1. Enable the Alternative Frequency feature of your car radio (consult your car radio
manual or the car dealer if your car radio has the AF feature, and how to enable
AF feature).
Note:
If your car radio does not have AF feature, the AFC function must not be
enabled, and refer to To Enable AutoScan.
If the AF feature of your car radio and TINY AUDIO C10’s AFC function are
not compatible, the AFC function must not be enabled; instead, refer to To
Enable AutoScan.
If you hear static noise or a FM program and before AFC tunes to a clear
frequency you can force an immediate frequency change manually, refer to
the To Force Immediate FM Transmitting Frequency Change section for detail.
While in AFC mode, if the FM transmitting frequency for TINY AUDIO C10
and the car radio listening frequency are out of sync, and you wish to reset

Table of Contents

Related product manuals