tiptel VP 28 Trouble Shooting
2) It will pop up a warning frame asking whether confirm to reset to factory settings.
Click to confirm the changes, or to cancel the operation.
To reset to factory via web interface:
1) Choose Upgrade page.
2) Click Reset to Factory button.
Note:
If you confirm all current setting changes including contact list, call history, account
settings, etc will be lost, you need to export the configuration first if you still want to
import the old configurations after reset. Or your phone must be configured a new
manually unless mass provisioning is used!
Firmware Update
The phone is delivered with pre-installed firmware which allows operating your phone
flawlessly. If you require updating the phone’s firmware please contact your system
administrator.
To update the firmware manually via web interface:
1) Choose Upgrade->Basic–>Browse, select the firmware file in your local computer.
2) Click Upgrade button to update the new firmware.
3) Please do not power off during the updating.
Note:
1. Any power interruption during the following process will most likely lead to a flash
memory error. As a result the system cannot boot up anymore. The procedure can
only be conducted in Administrator Mode.
Auto provision
To setting auto provision via Web interface:
1) Choose Upgrade->Advanced, configure the relating settings, It supports three
upgrade methods: PNP DHCP URL . PNP include PNP Active ; DHCP include
DHCP Active and Custom Option ; URL include Server URL Common AES
Key MAC-Oriented AES Key .
2) If you choose Power On is On, it will update when the phone is on . And also you can
choose the fixed time to update , for example : Interval , Weekly , Time , Day of
week , ect
3) Click Confirm button, when configuration files are not automatically updated at the
same time.
To Next Page
