EasyManua.ls Logo

Toa A-9060DH - 26.6.2. T-001 T

Toa A-9060DH
136 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
131
26.6.2. T-001T
+24 V DC, –24 V DC, +6 V DC
35 mA (at +24 V DC), 35 mA (at –24 V DC), 60 mA (at +6 V DC)
2 channels, max. +20 dB* (at 10 kΩ load), 600 Ω, electronically-balanced,
removable terminal block (3 pins)
20 – 20,000 Hz +1, –3 dB
0.005% (at 1 kHz, 20 – 20,000 Hz BPF, 5 V output, 10 kΩ load)
Over 73 dB (at 20 – 20,000 Hz BPF)
Under –91 dB (at 20 – 20,000 Hz BPF, VOL: –70 dB)
Over 87 dB (at 20 kHz)
24 bit Δ∑DAC
48 kHz
Bass: ±12 dB (at 100 Hz)
Treble: ±12 dB (at 10 kHz)
10 bands, Frequency: 20 – 20,000 Hz, 31 steps, Variable range: ±12 dB,
Q: 0.3 – 5
15 (compatible with TOA speakers only)
–12 dB/oct, Variable frequency range: 20 – 400 Hz, 14 steps
–12 dB/oct, Variable frequency range: 4,000 – 20,000 Hz, 8 steps
Depth: 1 – 5
0 – 40 ms (1 ms step), maximum 40 ms (CH1 + CH2), mixer mode only
–10 to +40°C
Panel: Aluminum, hair-line
35 (w) x 78 (h) x 91.5 (d) mm
82 g
Power Source
Current Consumption
Output
Frequency Response
Total Harmonic Distortion + N
S/N Ratio
Residual Noise
Cross Talk
D/A Converter
Sampling Frequency
Tone Control
Parametric Equalizer
Speaker Equalizer
High-pass Filter
Low-pass Filter
Compressor
Delay
Operating Temperature
Finish
Dimensions
Weight
* 0 dB = 1 V
Note: The design and specifications are subject to change without notice for improvement.
• Accessories
Removable terminal plug (3 pins) .................... 2
Machine screw M3 x 8 ..................................... 2

Table of Contents

Other manuals for Toa A-9060DH

Related product manuals