To Next PageTo Next PageWhy is there excessive noise coming from my Toa A-9120DHM2?
Excessive noise in the Toa Amplifier can occur due to an incorrect module input sensitivity setting. The unit digitizes audio signals and varies the input level with a digital volume control. If the input or output volume control is set higher than 0 dB while the AD converter input remains low, noise may increase. Adjusting the input sensitivity setting can resolve this issue.
What to do if the sound from my Toa Amplifier is distorted?
Sound distortion in the Toa Amplifier is often due to an incorrect module input sensitivity setting. The unit digitizes audio signals, and if an extremely large input is fed into the AD converter, the sound remains distorted even when the volume is decreased. Adjusting the input sensitivity setting can resolve this issue.
Why is my Toa A-9120DHM2 Amplifier malfunctioning?
If your Toa Amplifier isn't working as expected, it might be due to an incorrect item or parameter setting. Review the related settings and their contents to ensure they are properly configured.
How to fix phantom power not working on Toa A-9120DHM2 Amplifier?
If phantom power is not being supplied by your Toa Amplifier, it could be due to a couple of reasons: 1. The D-001T module mounting screw might not be securely tightened. Make sure the screw is tightened. 2. The phantom power might be set to OFF in the D-001T module input setting. In this case, set the phantom power to ON in the input setting.
Why are the Zone manager and Remote control panel not working on my Toa Amplifier?
If the Zone manager and Remote control panel aren't working with your Toa Amplifier, check that the correct type of Zone manager or Remote control panel is selected and that the ID is set correctly. Also, a higher-priority broadcast might be in progress, indicated by the paging activation function SW flashing.
What to do if only some settings on my Toa A-9120DHM2 Amplifier are not working correctly?
If only some settings are not working correctly on your Toa Amplifier, it could be due to an incorrect module type being selected or a module being inserted into the wrong slot. Verify the related setting items and their contents.
Why is my condenser microphone not working correctly with my Toa A-9120DHM2?
If your condenser microphone isn't operating correctly with the Toa Amplifier, and it requires over +24 V, the D-001T module's phantom power supplies +24 V. You'll need to separately prepare phantom power supply equipment recommended by the equipment manufacturer.
Why is noise generated by my Toa A-9120DHM2?
Noise generation in your Toa Amplifier might be due to a module mounting screw that is not securely tightened. Ensure that the screw is tightened to resolve this issue.
General| Power Output | 120 W |
|---|---|
| Rated Output | 120 W |
| Output | Speaker output |
| Output Impedance | 4-16 Ω |
| Dimensions | 420 x 132 x 320 mm |
| Weight | 8.5 kg |
| Power Source | AC 100V, 50/60Hz |
| Frequency Response | 50Hz-20kHz |
| Signal-to-Noise Ratio | 60 dB |
| Input Impedance | MIC: 600 Ω, AUX: 10 kΩ |
Detailed description of the front panel layout and functions of the 9000M2 Series Amplifiers.
Specification and function of various optional plug-in modules for system expansion.
Details on optional accessories like microphones and zone managers for enhanced functionality.
Description of the unit's application as a mixer for speech and sound reinforcement.
Explanation of the unit's functionality as a paging amplifier with priority levels.
Step-by-step guide to fundamental operations like power, input/output adjustments.
Instructions on how to configure and initiate zone paging broadcasts.
Steps to unlock front panel controls using a password or other methods.
Detailed flowcharts for configuring input channel settings based on module type.
Procedures for setting up and managing the key lock function to prevent unauthorized access.
Procedure to recall previously saved scene memory configurations.
Steps to save current settings into scene memory for later recall.
Table listing the default values for various input, output, and utility settings.
Step-by-step instructions for correctly inserting modules into the unit's slots.
Visual examples of different module configurations for practical reference.
Wiring diagrams and explanations for control input/output terminals and remote volume controls.
Guidance on connecting speakers to different output terminals for various amplifier models.
Dimensional drawing of the AN-9001 ceiling mount microphone.
Dimensional drawing of the ZM-9001 Zone Manager.
Dimensional drawing of the ZM-9011 Remote Control Panel.
Technical specifications for the M-9000M2 pre-amplifier unit.
Technical specifications for various optional modules like input, output, and control modules.
Technical specifications for optional accessories like microphones and zone managers.
