Toa A-9120DHM2 - Erasing Scene Memory

96
11.3. Erasing Scene Memory
Step 1. Hold down the Memory key.
The Scene memory setting screen is displayed.
Step 2. Rotate the Parameter setting knob to display "ERASE"
indication.
Step 3. Press the Right shift key to display the Scene memory
erasure screen.
Step 4. Select with the Parameter setting knob the Scene
memory bank number (01 – 32) to be erased.
Step 5. Press the Right shift key to erase the setting data
stored in the designated memory bank number.
After erasure completion, the display returns to the
normal use state.
SCENE SETT I N G ERA S E
ERASE 01 S CEN E 1
ERASE 03 S CEN E 3
01 1
SCENE
–
SCENE SETT I N G
LOA D
01
SCENE
–
3
5
PARAMETER
4
1
MEMORY
1
PARAMETER
2