Toa A-9060DH - Page 87

87
Output Channel Settings
OUT1
ON
–20.0 dB
0 dB
OFF
ALL FLAT
OFF
01 (When EQ = ON and EQ band number = 01)
0 dB (When EQ = ON and EQ band number = 01)
1.5 (When EQ = ON and EQ band number = 01)
31.5 Hz (When EQ = ON and EQ band number = 01)
OFF
OFF
OFF
Output Channel Selection
Channel Control
Channel Gain
BASS/TREBLE
Loudness Compensation
Speaker Parameter Presetting
EQ
EQ Band Number
Gain
Q
Center Frequency
HPF
LPF
Compressor
–20 dBDucker Attenuation Level
[Settings when the AN-001T is not used]