Toa D-901 - Page 86

86
[Auto-Leveler Settings]
Setting Item Setting Range
Target Level –20 to +10 dB (0 dB), 1 dB steps
Maximum Gain 0 to +20 dB (+6 dB), 1 dB steps
Attack Time 10, 20, 50, 70, 100, 120, 150, 200,250, 300, 500
, 700 ms,
1, 1.2, 1.5, 2, 2.5, 3, 5, 7, 10 s
Release Time 100, 120, 150, 200, 250, 300, 500, 700 ms,
1, 1.2, 1.5, 2, 2.5, 3, 5, 7, 10 s
[Gate Settings]
Setting Item Setting Range
Threshold Level –50 to +20 dB (–40 dB), 1 dB steps
Hysteresis 0
to +10 dB, 1 dB steps
Depth –∞ to 0 dB (–20 dB), 1 dB steps
Hold Time 10, 20, 50, 70, 100, 120, 150, 200, 250, 300, 500, 700 ms,
1, 2, 3, 5, 10 s
Attack Time 10, 20, 50, 70, 100, 120, 150, 200, 250, 300, 500, 700 ms,
1, 2, 3, 5, 10 s
Release Time 10
, 20, 50, 70, 100, 120, 150, 200, 250, 300, 500, 700 ms,
1, 2, 3, 5, 10 s
ON/OFF ON, OFF
[Level Sense Settings]
Setting Item Setting Range
Attack Time 0.2
, 0.5, 0.7, 1.0, 1.5, 2, 3, 5, 7, 10, 20, 50, 70, 100, 120, 150, 200,
250, 300, 500, 700 ms
1, 2, 3, 5 s
Release Time 10, 20, 50, 70, 100, 120, 150, 200
, 250, 300, 500, 700 ms,
1, 2, 3, 5 s
[Auto-Mixing Group Settings]
Setting Item Setting Range
Auto-Mixing Group GROUP A, GROUP B, GROUP C, GROUP D
[Ducker Settings]
Setting Item Setting Range
Priority Level 1
–
8 (in order of the priority level from high to low)
Depth
–
∞ to 0 dB (–20 dB), 1 dB steps
Attack Time 10, 20, 50, 70, 100, 120, 150, 200, 250, 300, 500, 700 ms,
1, 2, 3, 5, 10 s
Release Time 10, 20, 50, 70, 100, 120, 150, 200, 250, 300, 500, 700 ms,
1, 2, 3, 5, 10 s
ON/OFF ON, OFF
[NOM Attenuation Settings]
Setting Item Setting Range
Attenuation Gain
0 log
10 NOM – 20 log10 NOM (10)
ON/OFF ON, OFF