Toa M-9000 - Page 67

67
DISABLE O UT1 CIN01
(When Trigger is set to "C-IN," "VOX," or "ZP," and only when Paging prohibition is set to ON)
(D9) Paging prohibited channel and control input terminal settings
Paging prohibited channel Control input terminal
Set the paging prohibited output channel, and the control input terminal to enable the paging prohibition
function.
With Trigger = C-IN or VOX, while the designated control input terminal is closed, paging calls are disabled to
all of the paging zones to which the set output channel is assigned.
With Trigger = ZP, paging calls are not output only at the designated output channel.
Assigning a function to this terminal overwrites the previously set function on it if there is.
Use the Right or Left shift key to move between the on-screen setting items.
OUT1 – 2, Max. 8 when T-001Ts are used (default: OUT1)
CIN01 – 04, CIN01 – 12 when C-001T is used (default: CIN01)
Setting Range
Prohibited Channel
Control Input Terminal