Tomberlin CrossFire 150 - Page 11

- The battery needs to sit for Thirty (30) minutes before charging. Letting the battery sit will allow the
electrolyte to penetrate the plates and provide a longer battery life as well as better battery performance. Place
the cap strip loosely over the holes in the top of the battery while allowing it to sit.
- After sitting for thirty (30) minutes, the battery is ready for charging. Push the caps fi rmly into the holes. Do
not pound or hammer on the caps to force them into place This will seal the battery. Do Not attempt to remove
the caps after sealing the battery.
1
2
3
4
5
6
7
8
7