• 0-10 hours of operation
Do Not accelerate past half (1/2) throttle for long periods of time.
Do Not operate the machine at one continuous throttle. Vary the throttle during operation. Allow the
engine to cool for ten minutes after each hour of use.
• 10-20 hours of operation
Do Not accelerate past three-quarter (3/4) throttle for long periods of time. Vary the throttle during
operation and avoid maximum acceleration. Allow the engine to cool for ten minutes after each 1.5
Vary acceleration while driving. Do Not use full throttle for long periods of time. Allow the engine to
cool occasionally during long periods of operation.
• Change the engine oil after the fi rst 5 hours of operation. Please reference the table in this manual for
suggested oil change times after the break-in process.
To Next Page
Loading...