Tomberlin CrossFire 150 - Adjusting the Shocks

ADJUSTING THE SHOCKS
- The front and rear shocks each have fi ve adjustable positions.
- The default position has been set by the manufacturer and is located in the middle.
- The tension of the shock will change depending on the way that it is rotated.
- To increase the tension, rotate to the right, to decrease the tension, rotate to the left. It is important to adjust
the shocks to correspond to the weight of the riders.
- Do NOT attempt to operate this kart if the shocks in the front are not on the same settings, or if the shocks in
the back are not on the same settings.
68