TomTom Bandit Reference Guide

19
5. Install the 360 pitch mount on the mount base. Push down the TomTom Bandit plate to lock the
pitch mount on the base.
6. Install the TomTom Bandit on the 360 pitch mount. Make sure the TomTom Bandit is secure.
7. Adjust the position of the TomTom Bandit, then push the pitch mount lever to the closed
position to lock the pitch mount.
Tip: Use the Mobile app live viewfinder to set the TomTom Bandit to the correct view.
Important: Make sure your TomTom Bandit is secure before you start every activity. Regularly
check whether the mount is secure. If the activity involves shocks or vibration, use a lanyard
to prevent loss of the TomTom Bandit if the mount fails.

TomTom Bandit Specifications

General

Photo Resolution	16 MP
Sensor	CMOS
Battery	1900 mAh
Battery Life	Up to 3 hours
GPS	Yes
Resolution	4K
Image Sensor Size	1/2.3-inch
Field of View	160°
Storage	MicroSD card (up to 128GB)
Connectivity	Wi-Fi, Bluetooth
Sensors	Accelerometer, Gyroscope
Dimensions	94 x 38 x 52 mm
Weight	190 grams
Frame Rate	30fps (4K), 60fps (1080p), 120fps (720p)
Waterproof	IPX7 (without additional housing), IP68 with optional lens cover