3.3. Athene primary screens
22
Manual / auto spinner speed control. Press to toggle between
AUTO and MAN mode. In AUTO mode, press to set the spinner
speed. Spinners will automatically run at the set speed. In manual
mode, they can be adjusted on-the-go. Note: Please refer to the
machinery manufacturer's manual to establish the correct spinner
RPM for the product / desired spread width.
Gate height
Displays the gate height control option. Use the plus and minus
buttons to adjust the height.
Auxiliary function
Displays the auxiliary hydraulic function. Use the arrow buttons to
activate the function.
To Next Page
Loading...
