Toptech RCU II DIV2 User Manual

46
MultiLoad II Lectro Count Remote Display Wiring 5.4.10
I/O DIGITAL/
ANALOG
I/O 2 METER
METER 0 METER 1
PORT 11/
PORT 0.10
+
-
5 – 28 Vdc
PORT 1.10
+
-
+
-
PORT 1.10.OUT
PORT 1.10.IN
PORT 11.OUT/
PORT 11.IN/
IN 1

OUT 2

IN 3

OUT 4

IN 5
OUT 6
IO_DA TB3
PORT 10
PORT 11
PORT 12
PORT 10/
PORT 0.10.OUT
PORT 0.10.IN
PORT 10.OUT/
PORT 10.IN/
IN 1

OUT 2

IN 3
OUT 4
IO_2M TB9
PORT
0.10
IN 1
OUT 2
IN 3

OUT 4

IO_2M TB9
PORT
1.10
≥ 500 mA
RESET
12 V COM
COUNT +
12 Vdc
Note: Use only model E1613. The Lectro Count +12Vdc, 12V common can be supplied by an external source.
Note (I/O DIGITAL/ ANALOG Only): Connect Port 10 to Lectro Count output pulse. Connect Port 11 to Lectro Count reset pulse.
Note (I/O 2 METER Only): Connect Port 0.10 to Lectro Count output pulse. Connect Port 1.10 to Lectro Count reset pulse.

Toptech RCU II DIV2 Specifications

General

Brand	Toptech
Model	RCU II DIV2
Category	Controller
Language	English