Toro 07390 Workman HDX-Auto - Page 56

inch),repeatsteps3and4untilyoumeasurea6.35mm
(1/4inch)gapbetweenthepedalandtheoor.
AdjustingtheAcceleratorPedalUpstop
1.Withtheacceleratorpedalup,measurethe
distancefromtherearward-bottomcornerofthe
accelerator-pedalarmtotheoor(Figure88).
Note:Writedownthismeasurement(measurement
1).
Figure88
1.Accelerator-pedalarm3.Measurement2
2.Measurement1
2.Gentlymovethethrottlepedaldownuntilthefreeplay
isremovedfrombetweentheacceleratorpedalandthe
throttlecable(Figure88).
3.Whileholdingthepedalinpositiontoremovethefree
play,measurethedistancefromtherearwardbottom
corneroftheaccelerator-pedalarmtotheoor(Figure
88).
Note:Writedownthismeasurement(measurement
2).
4.Subtractmeasurement2frommeasurement1;the
resultisthepedal-freetravel.
Note:Thepedal-freetravelshouldmeasure3mm
(0.125inch).
5.Ifthepedal-freetravelislargerthanorsmallerthan3
mm(0.125inch),performthefollowing:
A.Loosenthejamnutthatsecuresthe
accelerator-pedalstop(Figure89).
B.Rotatetheaccelerator-pedalstopinthefollowing
directions:
•Clockwisetoincreasethepedal-freetravel
(Figure89).
•Counterclockwisetodecreasethepedal-free
travel(Figure89).
Figure89
1.Accelerator-pedalstop
3.Flangeofthe
accelerator-pedalarm
2.Jamnut
C.Tightenthejamnut(Figure89).
D.Repeatsteps1through4tomeasurethepedal-free
travel(Figure89).
Note:Thepedal-freetravelshouldmeasure3
mm(0.125inch).
E.RepeatstepsAthroughDuntilthepedal-free
travelis3mm(0.125inch).
56