Toro 41235 - Installing the Attachment Hold-Down Brackets

ismounted.Ifthehandthrottlekitisinstalleditmustbe
separatedfromthedashboardinordertoinstallthecontrol
mountplate.RefertotheHandThrottleKitOperator’sManual
fordirectionsinremovingandinstallingthehandthrottle
assembly.
InstallthecontrolboxmounttotheWorkmandashboard(or
adapterplate)usingthreebolts(5/16x1inch)andthreelock
nuts(5/16inch)asshowninFigure15.
Note:SomeolderWorkmanmachinesmayusefourbolts
andlocknuts.
Figure15
1.Controlboxmount3.Bolt(5/16x1inch)
2.Dashboard
4.Locknut(5/16inch)
Forvehicleswithaserialnumberof
239999999orlower
InstallingtheAdapterPlate
IfyouareinstallingthespraysystemonaWorkmanvehicle
withaserialnumberof239999999orlower,youwillneedto
usetheadapterplate,bolts,andnutsincludedintheloose
parts.
InstalltheadapterplatetotheWorkmandashboardusing
fourbolts(1/4x3/4inch)andfourangenuts(1/4inch)
asshownin
Figure16
Figure16
1.Adapterplate
4.Controlmount
2.Bolt(1/4x3/4inch)5.Bolt(5/16x1inch)
3.Flangenut(1/4inch)6.Locknut(5/16inch)
7
InstallingtheAttachment
Hold-downBrackets
Partsneededforthisprocedure:
2Hold-downbrackets
Procedure
1.Locateandremovethetworearboltsandangenuts
ontheliftcylinderbracket(Figure17).Retainthe
fastenersforlateruse.
17