Toro 41235 - Installing the Radiator Cover(for Workman 3000, 4000 Series Only)

G01 1748
1
2
3
4
Figure17
Lefthandsideshown
1.Locknut
3.Liftcylinder
2.Bolts
4.Cotterpin
2.Removethecotterpinsecuringtheliftcylindertothe
bracketandslidetheliftcylinderoutwardtoallowfor
theinstallationoftheholddownbrackets.
3.Installthehold-downbracketsusingthetwoboltsand
angenutsremovedpreviously(Figure18).
Figure18
Lefthandsideshown
1.Liftcylinderbracket
3.Bolts
2.Hold-downbracket
4.Liftcylinder
4.Repeatstepstoinstallthehold-downbracketonthe
oppositeside.
8
InstallingtheRadiatorCover
(forWorkman
®
3000,4000
seriesonly)
Partsneededforthisprocedure:
1Radiatorcoverassembly
4
Bolt(1/4x3/4inch)
Procedure
Theradiatorcoverisshippedwithanadditionalpanel
installedforaircooledvehicles.Ifyouareinstallingthecover
ontoaliquidcooledvehicle,removetheextracover.
1.Locatethespraysystempowerconnectoronthewiring
harnessinstalledpreviously.
2.Installtheradiatorcoverassemblyoverthevehicle’s
radiator(Figure19).
Important:Makesurethespraysystempower
connecterisroutedtowardthefrontofthevehicle
andnottrappedundertheradiatorcoverassembly.
Figure19
Lefthandsideshown
1.Radiatorcoverassembly
3.Spraysystempower
connector
2.Bolt(3/8x1inch)
3.Securethecovertotheframeusingfourbolts(3/8
x1inch).
18