Thismachinecanalsouseabiodieselblendedfuelofup
toB20(20%biodiesel,80%petrodiesel).Thepetrodiesel
portionshouldbeloworultralowsulfur.Observethe
followingprecautions:
•Thebiodieselportionofthefuelmustmeetspecication
ASTMD6751orEN14214.
•TheblendedfuelcompositionshouldmeetASTMD975
orEN590.
•Paintedsurfacesmaybedamagedbybiodieselblends.
•UseB5(biodieselcontentof5%)orlesserblendsincold
weather.
•Monitorseals,hoses,gasketsincontactwithfuelasthey
maybedegradedovertime.
•Fuellterpluggingmaybeexpectedforatimeafter
convertingtobiodieselblends.
•Contactyourdistributorifyouwishformoreinformation
onbiodiesel.
FillingtheFuelTank
Fueltankcapacity:approximately45L(12USgallons).
Note:Thefueltankfeaturesafuelgaugewhichshowsthe
leveloffuelinthetank—checkthefuelgaugefrequently.
1.Positionthesprayeronalevelsurface.
2.Settheparkingbrake,stopthepump,stoptheengine,
removethekey,andallowtheenginetocool.
3.Cleantheareaaroundthefuel-tankcap(Figure23).
Figure23
1.Fuelgauge2.Fuel-tankcap
4.Removethefuel-tankcap.
5.Fillthetanktoabout2.5cm(1inch)belowthetopof
thetank,(bottomofthellerneck).
Note:Thisspaceinthetankallowsfueltoexpand.
Donotoverll.
6.Installthefueltankcapsecurely.
7.Wipeupanyfuelthatmayhavespilled.
PreparingtoUsetheSprayer
CleaningtheSuctionStrainer
ServiceInterval:BeforeeachuseordailyCleanthesuction
strainermoreoftenwhenusingwettable
powders.
1.Positionthesprayeronalevelsurface,settheparking
brake,stopthepump,stoptheengine,andremovethe
keyfromthestarterswitch.
2.Atthetopofthesprayertank,removetheretainerthat
securesthehosettingtoattachedtothelargehose
andthestrainerhousing(Figure24).
Figure24
1.Suctionhose
2.Retainer
3.Removethehoseandhosettingfromthestrainer
housing(Figure24).
4.Pullthesuctionstraineroutofthestrainerhousingin
thetank(Figure25).
Figure25
1.Suctionstrainer
5.Cleanthesuctionstrainerwithcleanwater.
6.Insertthesuctionstrainerintothestrainerhousing
untilthestrainerisfullyseated.
25