Toro 41593 - Lubrication; Greasing the Sprayer; Greasing the Boom Hinges; Greasing the Actuator Rod Bearings

Lubrication
GreasingtheSprayer
ServiceInterval:Every50hours—Lubricatethepump.
Every50hours/Yearly(whichevercomesrst)
GreaseType:No.2general-purpose,lithium-basegrease.
ToroPremiumAllPurposeGreaseisavailablefromyour
ToroDistributor.
1.Wipethegreasettingcleansothatforeignmatter
cannotbeforcedintothebearingorbushing.
2.Pumpgreaseintothebearingorbushing.
3.Wipeoffexcessgrease.
ThegreasettingspositionsareillustratedinFigure44
andFigure45.
1
g018935
Figure44
Pumpcenter
1.Greasepoint
Figure45
Threettingsinsideeachfrontwheel
1.Greasepoint
GreasingtheBoomHinges
ServiceInterval:Every100hours
Important:Iftheboomhingeiswashedwithwater,
allwateranddebrismustbeclearedfromthehinge
assemblyandfreshgreasemustbeapplied.
GreaseType:No.2general-purpose,lithium-basegrease.
1.Wipethegreasettingscleansothatforeignmatter
cannotbeforcedintothebearingorbushing.
2.Pumpgreaseintothebearingorbushingateachtting
Figure46.
Figure46
Rightboom
1.Greasetting
3.Wipeoffexcessgrease.
4.Repeattheprocedureforeachboompivot.
GreasingtheActuatorRod
Bearings
ServiceInterval:Every400hours/Yearly(whichevercomes
rst)
GreaseType:No.2general-purpose,lithium-basegrease.
1.Extendtheboomstothesprayposition.
2.Removethecotterpinfromthepivotpin(Figure47).
3.Liftupontheboomandremovethepin(Figure47).
Slowlylowertheboomtotheground.
4.Inspectthepinforanydamage,replaceifnecessary.
40