EasyManua.ls Logo

Toro 74265TE - Stopping the Machine

Toro 74265TE
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
StoppingtheMachine
Tostopthemachine,movethetractioncontrolleverstothe
NEUTRALpositionandthentotheNEUTRAL-LOCKposition,
disengagetheblade-controlswitch(PTO),andturnthe
ignitionkeytotheOFFposition.
Engagetheparkingbrakewhenyouleavethemachine.
Remembertoremovethekeyfromtheignitionswitch.
CAUTION
Childrenorbystandersmaybeinjuredifthey
moveorattempttooperatethemachinewhileitis
unattended.
Alwaysremovetheignitionkeyandengage
theparkingbrakewhenleavingthemachine
unattended,evenifjustforafewminutes.
UsingtheSideDischarge
Themowerhasahingedgrassdeectorthatdisperses
clippingstothesideanddowntowardtheturf.
DANGER
Withoutagrassdeector,dischargecover,ora
completegrass-catcherassemblymountedin
place,youandothersareexposedtobladecontact
andthrowndebris.Contactwithrotatingmower
blade(s)andthrowndebriswillcauseinjuryor
death.
Neverremovethegrassdeectorfromthemower
becausethegrassdeectorroutesmaterialdown
towardtheturf.Ifthegrassdeectorisever
damaged,replaceitimmediately.
Neverputyourhandsorfeetunderthemower.
Nevertrytoclearthedischargeareaormower
bladesunlessyoumovetheblade-controlswitch
(PTO)totheOFFposition,rotatetheignition
keytotheOFFposition,andremovethekey.
Makesurethatthegrassdeectorisinthedown
position.
UsingtheLift-AssistLever
Theliftassistleverisusedalongwiththeheight-of-cutlever
forraisingthemowerdeck.Thisallowsforeasierraisingof
themowerdeck.
1.Placeyourfootontolift-assistlever.
2.Pressonthelift-assistleverwhilepullinguponthe
height-of-cutlever(Figure29).
g001807
Figure29
1.Lift-assistlever
AdjustingtheHeightofCut
Adjusttheheightofcutfrom38to127mm(1-1/2to5
inches)in6mm(1/4inch)incrementsbymovingtheclevis
pinintodifferentholelocations.
1.Raisetheheight-of-cutlevertotheTRANSPORT
position(alsothe127mm(5inches)cutting-height
position)(Figure30).
g009568
Figure30
1.Height-of-cutlever
2.Pin
2.Toadjust,removethepinfromtheheight-of-cut
bracket(Figure30).
3.Selectaholeintheheight-of-cutbracketcorresponding
totheheightofcutdesired,andinsertthepin(Figure
30).
4.Movethelevertotheselectedheight.
27

Related product manuals