Toro Groundsmaster 4010-D - Checking the Rear Axle Lubricant; Checking the Planetary Gear Drive Oil

Figure13
1.Hydraulictankcap
4.Removethedipstickfromthellerneckandwipeit
withacleanrag.Insertthedipstickintothellerneck;
thenremoveitandchecktheuidlevel.Theuidlevel
shouldbebetweenthetwomarksonthedipstick.
5.Ifthelevelislow ,addtheappropriateuidtoraisethe
leveltotheuppermark.
6.Installthedipstickandcapontothellerneck.
CheckingthePlanetaryGearDriveOil
ServiceInterval:Every400hours
Checktheoillevelafterevery400hoursofoperationorif
externalleakageisnoted.UsehighqualitySAE85W-140gear
lubeasareplacement.
1.Withmachineonlevelsurface,positionthewheelso
onecheckplug(Figure14)isatthe12o'clockposition
andtheotherisat3o'clockposition.
g019500
Figure14
1.Check/drainplug(2)
2.Removetheplugatthe3o’clockposition(Figure14).
Oillevelshouldbeatthebottomofthecheckplug
hole.
3.Iftheoillevelislow,removetheplugatthe12o’clock
positionandaddoiluntilitbeginstoowoutofthe
holeatthe3o’clockposition.
4.Re-installbothplugs.
CheckingtheRearAxleLubricant
ServiceInterval:Every400hours
TherearaxleislledwithSAE85W-140gearlube.Checkthe
oillevelbeforetheengineisrststartedandevery400hours
thereafter.Thecapacityis2.4liters(80oz).Visuallyinspect
forleaksdaily.
1.Positionthemachineonalevelsurface.
2.Removeacheckplugfromoneendoftheaxle(
Figure
15)andmakesurethatthelubricantisuptothebottom
ofthehole.Ifthelevelislow,removethellplug
(
Figure15)andaddenoughlubricanttobringthelevel
uptothebottomofthecheckplugholes.
Figure15
1.Checkplug
2.Fillplug
CheckingtheRearAxleGearBox
Lubricant
ServiceInterval:Every400hours
ThegearboxislledwithSAE85W-140gearlube.Check
theoillevelbeforetheengineisrststartedandevery400
hoursthereafter.Thecapacityis0.5liter(16oz).Visually
inspectforleaksdaily.
1.Positionthemachineonalevelsurface.
2.Removethecheck/llplugfromtheleftsideofthe
gearbox(
Figure16)andmakesurethatlubricantis
uptothebottomofthehole.Ifthelevelislow ,add
enoughlubricanttobringtheleveluptothebottom
ofthehole.
26