HYDROSTATIC DRIVE SYSTEM
6-3LX Lawn Tractor Service Manual
6
10. Slide the engine pulley off the crankshaft. As the
pulley is being slid off the crankshaft, remove the
transmission drive belt from the pulley (Fig. 494).
12. Route the transmission drive belt out from above the
steering support bracket (Fig. 496).
Fig 494 PICT-7510
Fig 496 PICT-7515
13. Remove the transmission drive belt from around the
transmission pulley and fan (Fig. 497).
11. Remove the transmission drive belt from around the
crankshaft (Fig. 495).
Fig 497 PICT-7518
Fig 495 PICT-7514
To Next Page
Loading...
