• Review jobsite hazards, safety and emergency procedures, and individual
responsibilities with all personnel before work begins. Safety Data Sheets (SDS) are
available at www.Toro.com.
• Use equipment carefully. Stop operation and investigate anything that does not look or
feel right.
Equipment Preparation
Preparation checklists are available at www.Toro.com.
Installing Counterweights
Install counterweights as needed for attachments.
Mounting the Fire Extinguisher
Mount a fire extinguisher near the engine but away from possible points of ignition where
shown. The fire extinguisher should always be classified for both oil and electric fires. It
should meet legal and regulatory requirements.
G409122
3455-524A Page 3–5 Preparation: Equipment Preparation
To Next Page
Loading...
