Recommended Maintenance Schedule
Maintenance
Service Interval
Maintenance Procedure Part No.
Qty Description
After the first 10
hours
Checking the Exhaust Clamp
- - -
After the first 25
hours
Changing the Hydraulic Filter
110-4146 1
Hydraulic filter
After the first 50
hours
Changing the Engine Oil
505-117 1
Engine oil
Checking the Drive Belt Tension
127-4771 1 Fan belt
After the first 250
hours
Changing the Hydraulic Fluid
108-1184 1
Toro Premium Transmission/
Hydraulic Tractor Fluid
Before each use or
daily
Checking the Engine Oil
- - -
Draining the Fuel/Water
Separator
- - -
Checking the Battery
- - -
Checking the Engine Coolant
Level
- - -
Checking the Hydraulic Fluid
Level
- - -
Checking the Seat Belt
- - -
Every 10 hours
Checking the Engine Oil
- - -
Checking the Plow Vibrator Oil
- - -
Checking the Engine Coolant
Level
- - -
Every 25 hours Greasing the U-Joint
- -
Use general purpose grease
Every 50 hours
Draining the Fuel/Water
Separator
- - -
Checking the Exhaust System
- - -
Checking the Radiator Hoses
- - -
Every 250 hours
Checking the Air Filter
- - -
Changing the Hydraulic Filter
110-4146 1
Hydraulic filter
Checking the Gearbox Oil
- - -
Checking the Exhaust Clamp
- - -
Every 400 hours Checking the Fuel Lines
- - -
Every 500 hours
Changing the Air Filter
161-0674 1
Primary filter element
161-0675 1
Secondary filter element
Changing the Engine Oil
505-117 1
Engine oil
3455-524A Page 7–2 Maintenance: Recommended Maintenance Schedule
To Next Page
Loading...
