Chapter 1
Introduction
Intended Use
This machine is an articulating, hydrostatic, four-wheel drive, ride-on vibratory plow
designed to install cable and pipe in a variety of soils. Optional trenching, drilling, and reel
carrier attachments are available. Using this product for purposes other than its intended
use could prove dangerous to you and bystanders. Do not modify the machine or
attachments.
This machine should be operated, serviced, and repaired only by professionals familiar with
its characteristics and acquainted with the relevant safety procedures.
Operate this machine in ambient temperatures from -12° to 46°C (10° to 115°F). Contact
your Authorized Service Dealer for provisions required for operating this machine in extreme
temperatures.
Read this information carefully to learn how to operate and maintain your product properly
and to avoid injury and product damage. You are responsibility for operating the product
properly and safely.
Getting Help
G402348
Visit www.Toro.com for product safety and
operation training materials, accessory
information, help finding a dealer, or to register
your product.
Whenever you need service, genuine Toro parts,
or additional information, contact an Authorized
Service Dealer or Toro Customer Service and have
the model and serial numbers of your product
ready. These numbers are located on the serial
plate on your product
. Write the numbers in the
space provided.
IMPORTANT
With your mobile device, you can scan the QR code on the serial number decal (if
equipped) to access warranty, parts, and other product information.
Model
Number:
Serial
Number:
Introduction Page 1–1 3455-524 A
To Next Page
Loading...
