Checking the Plow Mounting Bolts
G433378
Check the bolts every 10 hours. Tighten as
needed.
ROPS Maintenance
ROPS Notice
The protection offered by the Rollover Protective Structure (ROPS) will be impaired if it has
been subjected to any modification, structural damage, or has been involved in an overturn
accident. The ROPS must be replaced after a roll-over.
Do not try to weld or straighten a damaged ROPS bar.
Checking the Roll Bar
1. Check the 4 bolts for looseness or wear. Torque the bolts to 203–223 N•m (150–165
ft•lb).
G428618
3455-524A Page 7–22 Maintenance: Plow Maintenance
To Next Page
Loading...
