Tying Down the Machine (continued)
G418233
Distance Metric US
A 45.7 to 76.2 cm 18 to 30 inches
Unloading the Machine
WARNING
Crushing weight could cause death or serious injury. Stay away.
To help avoid injury:
• Unload the unit with the engine in low idle and the boom as low as possible.
• Unload the trailer on level ground.
• Attach the trailer to the vehicle before loading or unloading.
1. Lower the trailer ramp.
2. Remove the chains from the tie-down points.
3. Start the machine.
4. Raise the trencher boom, if attached, but keep it low.
5. Fully raise the plow blade and ensure that the plow swing lock is engaged.
6. Disengage the parking brake.
7. Slowly back the machine down the trailer or ramps.
Transport: Hauling the Machine Page 6–4 3455-524 A
To Next Page
Loading...
