Drive System Maintenance
Tire Specifications
Torque (in a crossing pattern) 108 to 135 N•m (80 to 100 inches)
Tire Size
Ply Rating
Pressure
kPa
psi
23 x 10.5 x 12 4 138 20
26 x 12 x 12 8 207 42
Note: Use a lower tire pressure when operating in sandy soil conditions to provide better traction
in the loose soil.
G433377
Changing the Axle Oil
G431751
1. Place a drain pan under the pinion housing of
the axle.
2. Remove the bolts securing the cover, and
remove the cover and gasket.
3. Clean the surfaces.
4. Install a new gasket.
5. Install the cover and drain plug.
6. Remove the fill plug.
7. Add differential oil until the oil is level with the
bottom of the fill plug hole.
8. Install the fill plug.
9. Repeat with the other differential.
Maintenance: Drive System Maintenance Page 7–11 3455-524 A
To Next Page
Loading...
