Maintenance
Service Interval
Maintenance Procedure Part No.
Qty Description
Changing the Fuel Filter
125-2914 1
Fuel filter (water separator)
125-8752 1
Fuel filter (water separator on
engine)
Replacing the Drive Belt
127-4771 1 Fan belt
Checking the Roll Bar
- – -
Every 1,000 hours
Changing the Engine Coolant
026-0560 1 Antifreeze mix
Changing the Axle Oil
- - 80W-140 GL5
Every 1000 hours or
yearly, whichever
comes first
Changing the Hydraulic Fluid
108-1184 1
Toro Premium Transmission/
Hydraulic Tractor Fluid
Changing the Gearbox Oil
- - 80W-140 GL5
Monthly
Cleaning the Controls Linkage
Assembly
- – -
Yearly or before
storage
- – -
Adjusting the Neutral Position
- – -
Checking the Hydraulic Lines
- – -
Checking the Plow Blade
- – -
Maintenance: Recommended Maintenance Schedule Page 7–3 3455-524 A
To Next Page
Loading...
