Toro Micro-Master Series - 20 Technical Specifications

Micro-Master Touch User Guide
132
© 2014 Toro Australia Pty Ltd Ver 1.2, June 2014
20 Technical Specifications
Main Input Power
240 volt 50 Hz single phase - Standard
12 volt DC (11 volt minimum - 17 volt maximum)
Typical Power Ratings
240 volt input power : 60mA when idle
220mA at full station capacity
12 volt input power: 80mA when idle and screen blank
200mA when idle and screen on
240 mA with screen on, two station relays activated ( one
valve, one pump )
Output Power
Station Capacity : 24 volt AC at 2.0 Amp max. 8 (2 watt valves).
12 volt DC at 2.0 Amp max.
Pump Start Capacity: 24 volt AC at 1.0 Amp max.
12 volt DC at 1.0 Amp max.
Total Unit Capacity: 24 volt AC at 2.0 Amp max.
12 volt DC at 2.0 Amp max.
Input Function
8 user configurable logic inputs
Input Impedance: 6800 ohm
4 user configurable logic outputs
Operation: Normally open contacts closing to ground
Power Cable
AC Models supplied with " 2-core-and-E " circular cable and a 7.5 Amp three-pin flat-pin plug
complying with Fig. 1a of Australian Standard AS 3112.
DC Option supplied with 4 way bypass plug to supply external DC power.