Toro Micro-Master Series - Program Status and Totals

Micro-Master Touch User Guide
53
© 2014 Toro Australia Pty Ltd Ver 1.2, June 2014
9.2.10 Program Status and Totals
The Program Status and Totals screen is the fifth page of Advanced Program Parameters and is
displayed by pressing the icon on the Program Edit - Sequential or Program Edit - Grouping
screen and selecting the next page by pressing the icon four times.
Figure 33 - Program Advanced Parameters Edit - Page 5
Program Status
This section shows the current status for the selected program including remaining runtime for the
current program state.
Program Totals
This section shows the current totals for the program. Clicking the clear button will clear the totals.