Toro Micro-Master Series - PIN Number Setup; Commissioning Table

Micro-Master Touch User Guide
28
© 2014 Toro Australia Pty Ltd Ver 1.2, June 2014
5.8
PIN Number Setup
The PIN Number Setup screen is displayed by pressing the icon on the Setup Selection
screen.
Figure 18 - PIN Number Setup
Limited Access PIN
Clicking on the Limited Access PIN item will select the item, changing the background of the item to
light blue. Selecting the button and then clicking Edit will display the Number Edit screen.
Full Access PIN
Clicking on the Full Access item will select the item, changing the background of the item to light
blue. Selecting the button and then clicking Edit will display the Number Edit screen.
PIN Timeout
Clicking on the PIN Timeout item will select the item, changing the background of the item to light
blue. Selecting the button and then clicking Edit will display the Number Edit screen.
Lost PIN
If a Full Access PIN number is forgotten, no access to any function is possible. Please contact Toro
Technical Services for assistance.
5.9
Commissioning Table
Use the Commissioning Sheet (Table 1) on the next page to fill in commissioning data for later
reference.
Print 1 sheet for each Unit.