Micro-Master Touch User Guide
26
© 2014 Toro Australia Pty Ltd Ver 1.2, June 2014
double flash approximately every 5 seconds indicates a successful network connection.
RX – flashes when data is received by the module.
TX – flashes when data is transmitted by the module.
Turning Valves On & OFF manually
To turn a valve ON & OFF press the relevant button numbered 1 to 8 on the keyboard. When the key
is pressed the ON LED will flash to show the valve is turning on, or, the OFF LED will flash is the
valve is being turned off. Repeated pressing of the selected valve will turn the valve on and off.
5.7
Communication Module Options
The Communication Option screens are displayed by pressing the icon on the Setup
Selection screen.
Figure 16 - Communication Module Parameters
To Next Page
Loading...
Need help?
General
