Toro Micro-Master Series User Manual

Micro-Master Touch User Guide
78
© 2014 Toro Australia Pty Ltd Ver 1.2, June 2014
Chemical Injection Parameters
Allocated Chemical Station
The allocated station can be any station in the controller, or an output on the main screen panel.
Chemical Injection Units
Chemical Injection Units are independent of the irrigation program, and may be hours and minutes, or
minutes and seconds, or volumetric. If volumetric, the units are the same as the allocated flow
meter.
Prewet / Mixing Station
The allocated station can be any station in the controller, or an output on the main screen panel.
Prewet / Mixing Runtime
The initial delay before chemical injection to allow sufficient prewet and/or mixing time for the
chemical.
Mix During Irrigation
If enabled, the mixing station output will remain activated during irrigation.
Allocated Flow Meter
The allocated Flow Meter can be either a Flow Meter or an Aggregate Flow Meter. The allocated flow
meter can be the same flow meter as the irrigation program.

Toro Micro-Master Series Specifications

General

Brand	Toro
Model	Micro-Master Series
Category	Controller
Language	English