Toro Multi Pro 5800-G - Removing the Section-Manifold Valve

RemovingtheSection-Manifold
Valve
1.Removethequick-connectpinthatsecuresthe
quick-connectcouplerforthesection-bypass
valvetothesection-manifoldvalve(Figure112).
g191303
Figure112
1.Section-bypassvalve3.Quick-connectcoupler
(sectionsupplyhose)
2.Quick-connectpins4.Quick-connecttting
(agitationvalvemanifold)
2.Removethequickconnectpinthatsecuresthe
quick-connectcouplerforthesectionsupply
hosetothemanifoldforthequick-connecttting
ofthesection-manifoldvalve(Figure112).
3.Removethe2angeclampsthatsecurethe
section-manifoldvalvetotheangesofthe
adjacentcomponents(Figure113).
g191300
Figure113
1.Flange(couplingadapter)3.Section-manifoldvalve
2.Flange(section-manifold
valve)
4.Flangeclamps
4.Forleftorrightsection-valvemanifolds,remove
the2ange-headbolts(1/4x3/4inch)and
2angelocknuts(1/4inch)thatsecurethe
section-valvemanifoldtothevalvesupport
(Figure114).
g191304
Figure114
1.Flangelocknut(1/4
inch—leftandright
section-valvemanifold
positions)
4.Flange(couplingadapter)
2.Section-bypassvalve5.Gasket
3.Quick-connecttting
(section-valvemanifold)
6.Flange-headbolt(1/4x
3/4inch—leftandright
section-valvemanifold
positions)
81