Toro Workman UTX - After Operation Safety; After Operation Procedures

AfterOperation
AfterOperationSafety
GeneralSafety
•Beforeyouleavetheoperatingposition,dothe
following:
–Parkthemachineonalevelsurface.
–ShiftthetransmissionlevertotheP(PARK)
position.
–Shutoffthemachineandremovethekey.
–Waitforallmovementtostop.
•Allowthemachinetocoolbeforeadjusting,
servicing,cleaning,orstoringit.
•Donotstorethemachinewherethereisanopen
ame,spark,orpilotlight,suchasonawater
heaterorotherappliance.
•Keepallpartsofthemachineingoodworking
conditionandallhardwaretightened.
•Maintainandcleantheseatbelt(s)asnecessary.
•Replaceallworn,damaged,ormissingdecals.
HaulingtheMachine
•Usecarewhenloadingorunloadingthemachine
intoatraileroratruck.
•Usefull-widthrampsforloadingthemachineinto
atraileroratruck.
•Tiethemachinedownsecurely.
RefertoFigure74andFigure75forthetie-down
locationsonthemachine.
Note:Loadthemachineonthetrailerwiththefront
ofthemachinefacingforward.
g356657
Figure74
1.Fronttie-downlocations
g356660
Figure75
1.Reartie-downlocations
70